KB Logo

TOLIS Group Knowledge Base

Browse KB by category:
Go to KB #:
Glossary
Email   Bookmark



Showing: 1-15 of 21    Next Page »»
Articles
 
document Import Multi-tape archive sets without slow scanning each tape
If you have a multi-tape set that contains a single archive, it is possible to speed up the import.Instead of scanning all of the tapes in a set, only scan the LAST tape in each set.  Once the scan of the last tape completes, you will have tape entries in the Tapes datatable that look...
Not rated 2018-10-03 09:52:42 Views: 71
document BRU Server Reports [W010] Block Sequence Errors During Verify Pass on Multi-Tape Archives
An important note for Users of 2M (2048K) block sizes with BRU Server Recently we have received a number of reports from users witnessing a [W010] Block sequence error being reported for the first file on a 2nd or later volume in a multi-tape
Not rated 2018-05-14 08:24:57 Views: 593
document Information About Inconsistent Tapes
When BRU Server marks a tape as inconsistent, it's important to find the reason the inconsistent flag was not removed, not why it has been set.  Here's why: When BRU Server starts a backup operation to tape, the tape currently in use is immediately marked as inconsistent.  This is...
rating 2011-05-12 07:47:59 Views: 11905
document Fix BRU Server Permissions
If, for some reason, the file permissions have become altered for BRU Server's environment (in the /usr/local/bru-server/ folder) you can download and run the permission fix script to make sure that your BRU Server environment has all of the correct permissions for continued reliability and use. ...
rating 2011-05-10 12:27:14 Views: 9900
document I can't stop the BRU Server Server daemon on 10.4.x/10.5.x systems...
Problem: When trying to stop the BRU Server Server daemon, either through the command line with the --kill or using the BRU Server Config application, the server daemon will not remain stopped. Cause: The cause of this is due to LaunchD not releasing the BRU Server Server daemon.  Each...
rating 2010-07-28 09:48:26 Views: 13664
document brufilter: [E145] Streaming Checksum Error at Block...
Problem: BRU Server v2.0.0 - 2.0.2 has an periodic "[E145] Streaming checksum error at block..." error message on Windows, Linux, Mac OS X, and Unix clients. This error does not always happen on all systems. Solution: This error is actually a false-positive error and can safely...
rating 2010-01-25 09:37:37 Views: 16950
document Performing a Hardware Scan in BRU Server 2.0
Running a Hardware Scan in BRU Server 2.0 Problem When backing up to tape in with BRU Server v2.0, it checks a hardware signature to make sure that the hardware that was connected to the system during the last hardware scan is the same hardware that is currently connected.  The reason...
rating 2009-08-05 13:17:43 Views: 15440
document Using Multiple Stage Destinations with BRU Server 2.x
Using Multiple Stage Destinations with BRU Server 2.x By default, BRU Server only supports a single Stage destination. You can utilize multiple Stage destinations in BRU Server 2.x through creative use of additional user accounts. Because each defined BRU Server user for a given
rating 2009-08-05 12:25:37 Views: 14763
document Using USB Tape Drives on BRU Server for Linux
USB Tape Drives on Linux with BRU Server Description of Problem: The TOLIS Group Technical Support team has received several calls concerning the use of USB tape drives on Linux with BRU Server installations. The error message that is seen upon making the attempt to write to the tape...
rating 2009-01-15 10:48:30 Views: 16318
document Using BRU Server with Parallels
Backing up Parallels® Virtual Machines with BRU Server™ One important aspect to Parallels Virtual Machines is that there are two access points for backup and restore. At the host or server level, the BRU Server Agent has access to all of the guest OSes at the image level, while within...
Not rated 2008-07-25 11:47:13 Views: 13230
document Backing up Virtual Machines with BRU Server
Backing up Virtual Machines with BRU Server One important aspect to Virtual Machines is that there are two access points for backup and restore. At the host level, the BRU Server Agent has access to all of the guest OSes at the image level, while within the guest OSes, the BRU Server Agent can...
Not rated 2008-07-22 13:06:24 Views: 13468
document Does BRU Server support the ZFS filesystem?
Yes, BRU provides seamless support of the ZFS filesystem. For more information about the ZFS file system, please from the OpenSolaris website.
Not rated 2008-06-30 13:23:57 Views: 14015
document I keep getting "Error: (0x05:0x3B0E) Medium source element empty" messages on my backups. What does this mean?
I keep getting "Error: (0x05:0x3B0E) Medium source element empty" messages on my backups.  What does this mean? The error (0x05:0x3B0E) is a hardware error that can be broken down into two parts ( are in a specific format, BRU errors can be found in ).  The first part, 0x05...
Not rated 2008-06-23 12:44:21 Views: 16323
document Where are NFS mounted volumes in BRU Server displayed?
NFS Shares on Mac OS X Under Mac OS X, an SMB share is usually located inside the /Volumes folder under the system in which the SMB volume is mounted.  However, NFS mounted volumes do not display in the same place. If you are backing up a Snap Server other system that BRU Server cannot...
Not rated 2008-04-29 17:44:14 Views: 13914
document How to automatically disable Time Machine during a BRU Server backup.
Disable the autobackup of Time Machine during a BRU Server backup. If you use Time Machine in conjunction with BRU Server on Mac OS X then it is a good idea to turn off Time Machine for the duration of the BRU Server backup.  This process can either be automated or performed manually. ...
rating 2008-04-24 17:14:29 Views: 16016



RSS
Powered by KnowledgebasePublisher
Page Load Time: 0.03902 seconds / 39.02 milliseconds.
Page File Size: 33515 bytes.